Pilot Trial on a Flash or Spin Flash Dryer
Test your product on our 10 kg/hr flash and spin flash dryers before you buy.
- 24+Years of drying engineering
- 10kg/hr pilot flash dryer
- 10kg/hr pilot spin flash dryer
- ISO9001:2015 certified

Pilot trials
Test your product before you invest
Run your own wet powder, cake or paste on the 10 kg/hr flash or spin flash dryer in our Ahmedabad R&D centre. You hold the dried product in your hand, and we collect the data to size your industrial dryer.
- Find stickiness, wall build-up or heat damage before you buy
- Flash and spin flash dryer pilot plants
- Dried samples to approve with your own customers
R&D centre
The pilot plants in Ahmedabad
Trials for manufacturers and research institutes – and new drying procedures developed in-house.

Acmefil’s R&D centre in Ahmedabad runs product trials and develops new drying procedures. The pilot plants are open to manufacturers and research institutes at nominal charges, on mutually agreed terms.
- 10 kg/hrFlash dryer
- 10 kg/hrSpin flash dryer
Capacities are water evaporation rates. Trials for other Acmefil dryers (vibratory fluid bed, spray) on request.
How we work
From the first question to the last spare part
One team takes your project through six steps.
- 1
Understand your product
Feed form, moisture in and out, stickiness, heat sensitivity and capacity.
- 2
Select the dryer
Flash or spin flash – with the reason, and what we ruled out.
- 3
Test it
A pilot trial on our 10 kg/hr flash or spin flash dryer in Ahmedabad.
- 4
Design & supply
Process and mechanical design with feeder, hot air generator, cyclone and bag filter.
- 5
Install & commission
Our own erection and commissioning team starts the plant and trains your operators.
- 6
Service & spares
Genuine spares, upgrades, rebuilds and annual maintenance contracts.

Quote checklist
What to send for a quote
The more you share, the sharper the recommendation. A lab report or a sample photo helps most.
- Product name and its form – powder, cake or paste
- Particle size and bulk density
- Feed moisture and feed temperature
- Final moisture needed
- Capacity: feed rate or dry product in kg/hr
- Heat source available – gas, oil, steam or electric
- Hazards – solvents, dust explosion risk, heat sensitivity
- Site location and utilities
Free proposal
Book a pilot trial on your product.
Send a sample description, moisture and the capacity you plan – we agree a trial date and the data you want back.
