Flash Dryer FAQ
Straight answers on choosing a flash dryer, pilot trials, quotes and service.
- 24+Years of drying engineering
- 10kg/hr pilot flash dryer
- 10kg/hr pilot spin flash dryer
- ISO9001:2015 certified
FAQ
Choosing a flash dryer
What is a flash dryer?
A flash dryer is a continuous dryer in which wet material is dispersed into a fast stream of hot air. The moisture evaporates in seconds while the particles travel up a drying duct, and a cyclone and bag filter then separate the dry powder from the air. Read our comprehensive guide or see the machine on acmefil.com.
How does a flash dryer work?
A feeder – screw feeder, rotary valve or pneumatic conveyor – meters the wet solids into the duct. A heater (gas, oil, steam or electric) supplies hot air. The air carries and dries the particles in seconds, a cyclone collects the dry powder and a bag filter cleans the exhaust. The flash drying process guide goes through each step.
What is the difference between a flash dryer and a spin flash dryer?
A flash dryer disperses loose, crumbly material in the air stream by itself. A spin flash dryer adds a rotor in a swirling hot-air vortex that breaks up wet cake and paste, so feeds that will not disperse on their own can still be dried in seconds. See flash dryers and spin flash dryers.
What can I dry in a flash dryer?
Loose, crumbly wet solids that disperse in air: chemical powders and inorganic salts, pigments, minerals and fillers, starch and similar ingredients. Our applications guide and the applications page on acmefil.com list typical products.
What can I not dry in a flash dryer?
Feeds that will not fluidize or disperse. Granules and crystals dry better in a fluid bed dryer, a liquid or slurry in a spray dryer and sludge in a paddle dryer from our sister company AS Engineers. Wet cake and paste need a spin flash dryer. The dryer finder points you to the right one.
Is flash drying suitable for heat-sensitive products?
Often yes: the product is in the hot air for seconds only, and the air temperature is set to what the product can take. We confirm the settings on a sample or in a pilot trial. See how to select a flash dryer.
FAQ
Trials, quotes & service
Can I test my product before buying?
Yes. Acmefil’s R&D centre in Ahmedabad has 10 kg/hr flash and 10 kg/hr spin flash dryer pilot plants (quoted as water evaporation rate). They are open to manufacturers and research institutes at nominal charges. You see how your product behaves, and we collect the data to size the industrial dryer. See pilot trials.
What should I send for a quote?
Your product and its form (powder, cake, paste), feed moisture, final moisture, required capacity in kg/hr, the heat source available (gas, oil, steam or electric) and whether the product is heat-sensitive, sticky, abrasive or solvent-wet. A lab report or a sample photo helps. The investment guide explains what drives the price.
Do you supply complete plants?
Yes – design, engineering, supply, erection, commissioning and operator training, including the feeder, hot air generator, cyclone, bag filter, ID fan and PLC automation. See flash dryer systems.
Do you offer service, spares and upgrades?
Yes – genuine spare parts, plant upgrades and rebuilds, annual maintenance contracts and technical support. Our maintenance and troubleshooting guide covers common fixes.
Who builds the flash dryers?
Acmefil Engineering Systems Pvt. Ltd., Vatva GIDC, Ahmedabad, an ISO 9001:2015 certified company that has been building drying and concentrating equipment since 2000. Our sister company AS Engineers builds paddle and sludge dryers and centrifugal blowers.
Free proposal
Tell us about your product. We will size the flash dryer.
Share the product, feed form, moisture in and out and capacity – get a dryer recommendation, a budget quote and a pilot-trial option within one working day.
